VR38 R35 Ignition Coil Kit To Suit Nissan / Holden RB30 SOHC.

What differentiates us from other competitors;

True Bolt On - Our coil-on-plug conversion mounting adaptor has been cleverly designed for perfect coil to spark plug alignment and to provide effortless installation, just like how it would be if it was OEM.

Genuine Hitachi VR38 R35 GTR coil packs.

Billet aluminium 6061 mounting bracket, hard anodised black with a choice of dress up washer color.

Rigid coil stalk mids that meets or exceeds OEM standard for dielectric strength and dimensionally stable at all operating temperature retaining the spring and resistor within.

Fits under the OEM position throttle body and J-pipe intake setup.

Heavy gauge, high temperature and chemical resistant Teflon F.E.P wiring harness constructed with nylon sleeving and dual wall heat shrink.

Genuine connectors.

Professionally crimped terminals.


!  Known supported ECUs: Almost all modern aftermarket ECUs that allows you to configure ignition dwell time.

!  The coil kit has been designed to be compatible with only full length injectors and top feed fuel rail setup. Minor adjustment to the rail position may be necessary depending on the brand of fuel rail you are using to provide clearance to the coil connector/wiring.

!  Designed to be used with the recommended spark plugs by Nissan i.e. NGK BCPR series.

!  To maximise its performance, the ignition dwell time table for the R35 GTR coil is provided under the 'installation guide' tab

!  We do NOT sell individual components separately due to the custom components and fitment.



Shipping is available worldwide, trackable and insured.

Please note that we do not sell and recommend the use of counterfeit coil packs. Counterfeit products harm the automotive industry and are a hazard to your engine/safety. Be cautious when a seller uses words like “-style” or “-equivalent” to pass on cheap counterfeit products that will not perform.

We do not incorporate a wire loop in our harnesses for use with an inductive timing light as our experience proves it to be an unreliable source. To set ignition base timing, we recommend the use of coil on plug extension lead (such as DAT-Equipment TE010 or the like) to latch your inductive clamp onto for a much more reliable reading.


R35 GTR Coil Corresponding Part Numbers

Nissan: 22448-JF00B (Hanshin, Hitachi Automotive)

Hitachi: IGC0079, HEX EXA-2410N, U18N02-COIL

Verification From Hitachi:




Our RB Coil Kit Range:

RB20/25/26 R35 Coil Kit: https://www.50ignite.com/nissan-skyline-r32-r33-r34-rb20-rb25-rb26-r35-coil-kit

R32 RB20 & RB26 R8 Coil Kit: https://www.50ignite.com/nissan-skyline-r32-gtr-gtst

R33 GTST S1 RB25 S1 R8 Coil Kit: https://www.50ignite.com/nissan-skyline-r33-gtst-series-1

R33 GTST S2 RB25 S2 R8 Coil Kit: https://www.50ignite.com/nissan-skyline-r33-gtst-series-2

R34 GTT RB25 NEO R8 Coil Kit: https://www.50ignite.com/nissan-skyline-r34-gtt-neo-audi-r8-ignition-kit

R33 GTR RB26 R8 Coil Kit: https://www.50ignite.com/nissan-skyline-r33-gtr

R34 GTR RB26 R8 Coil Kit: https://www.50ignite.com/nissan-skyline-r33-gtr


RB30 SOHC Crank Trigger for ULTIMATE Ignition Accuracy: https://www.50ignite.com/nissan-rb30et-crank-cam-trigger-kit


R32 R33 R34 RB30 RB20 RB25 RB26 Coil Kit | VR38 R35 Coil Kit | RB Coil Upgrade | RB Coil Kit | GTR GTST | VL Commodore


Brand 5-0 Ignite
Shipping Weight 3.0000kg
Shipping Width 0.620m
Shipping Height 0.100m
Shipping Length 0.180m
Shipping Cubic 0.011160000m3

Be The First To Review This Product!

Help other 5-0 Ignite users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category